I’m thinking of getting the Bambu Labs P1S, anything that I should be aware of? Anybody got one? Thoughts?

  • ketcham1009@lemmy.ml
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    I’ve got a P1P that has been upgraded to a P1S. Leave the door open or the lid off when printing PLA (especially if using an AMS).

    Heat creep related jams are a pain to fix.

      • ketcham1009@lemmy.ml
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        If the printer is fully enclosed (door and lid closed) and the print is long enough. The heat from the hotend and bed can build up in the chamber, causing heat creep. The chamber temperature is not monitored. Since the nozzle and heatbreak are one piece, removing the clog is a bit more involved.

        I’ve had to do it 3 times since I bought the printer on release. All were 12+ hour PLA prints and done after high temperature filament prints (nylon and abs).

        The issue is entirely preventable, just me forgetting to open the door on long prints lol.

        • rasterweb@kbin.social
          link
          fedilink
          arrow-up
          2
          ·
          edit-2
          1 year ago

          I mostly print PLA so the lid is propped open and the door is ajar… Once winter comes to the midwest and my basement is freezing cold I may have to adjust things a bit. I added a Prusa MINI in January 2022 and could not print properly until I added an enclosure.

      • MangoPenguin@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        PLA doesn’t like heated enclosures, basically the filament melts at such a low temperature that the heat inside the printer can soften it enough to jam up.

    • FabulousAardvark@lemmy.mlOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      I’d not heard this, that’s really interesting to know coming from someone who has one, thanks.

      Printer alright apart from that?