I am new to 3D printing, but have always wanted to get into it. Unfortunately, I have very limited space and no dedicated area that I could call my workshop. I also travel frequently, and I would like something where I could take it with me for the day.

Therefore, I would like a portable, or at least very small printer. AFAIK, the new Positron V3.2 is purpose-built to solve this kind of problem.

I am asking whether that model is a good idea for a beginner. My main concern is the price, which I am willing to put up with if there really is no other portable printer.

My other concern is just the fact that it is new and I may be too inexperienced with printers to deal with problems that are natural in first-gen products. I have a decent amount of experience soldering and other electronics work, but nothing with small moving parts. Also IDK if sourcing parts would be an issue.

If, in your experiences, these make it not worth it as a first printer, what would you recommend as a portable printer?

  • Shadow@lemmy.ca
    link
    fedilink
    arrow-up
    8
    ·
    5 months ago

    So much of 3d printing comes down to getting everything perfectly aligned and dialed in. On a foldable printer like this, I would expect you to spend a ton of time calibrating after every time you move it.

    I think you’re on the right track with not wanting to deal with the problems likely to come with a first gen printer. Unfortunately I can’t recommend another product that fits your particular use case, maybe a https://bambulab.com/en-us/a1-mini but it’s not as portable as that positron.

    • d00ery@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      5 months ago

      Agreed, imho calibration is the biggest issue. Also print times - generally I wouldn’t leave a print job running (e.g. in hotel room whilst I’m out sightseeing) without being near or at least monitoring it. And finally the smell of some filaments can bother some people.

      On the otherhand it looks really neat, the size is great and I think it’d be a good solution to your requirements. Just don’t be surprised if you end up making a permanent space for it in order to avoid too much recalibration everytime you set it up 😂

      And addressing your other concern, I think part of the original reprap ideal was that a 3D printer could print parts to build another printer, and parts to modify and improve itself. I’ve got a i3 clone and parts are usually generic and off the shelf - you might be able to check what parts it uses?

      • Shadow@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        5 months ago

        I just realized… it looks like an upside down printer? The extruder is on the bottom on x/y sliders and the bed moves up. That feels like a bad idea to me, it’ll make bed adhesion so much more important.

        https://www.youtube.com/watch?v=X_QLxTVtyng

        I’m skeptical of claims + quality

        • HewlettHackard@lemmy.ca
          link
          fedilink
          arrow-up
          2
          ·
          5 months ago

          If you think about bed adhesion, the forces on a light plastic part from gravity are negligible. Think of how much force it takes to pop a finished part off the bed compared to the weight of the part. When you have adhesion problems, I’m sure the plastic shrinkage is causing pretty large forces (or on a tall part the nozzle bumps the top of the print and has a long lever arm to pry the part off the build surface).

  • HewlettHackard@lemmy.ca
    link
    fedilink
    arrow-up
    1
    ·
    5 months ago

    I don’t think I’d really view it as a typical first gen product; Kralyn has been working on it for quite a while and first showed it off 3 years ago. I saw a demo of LDO’s V3.2 at a RepRap Festival and it looks pretty solid.

    I haven’t watched the videos in quite a while but I’m sure there are demos of bed leveling, which would be my only real concern with unpacking and repacking it frequently.

    That said, since I haven’t owned one myself I can’t say “you should buy this!!1!”. Do you have the budget and time to start with another less-portable model at home to confirm you’re really into printing enough to spend the money on a positron? You don’t need a ton of space to store a Prusa MK4 when it’s not in use, and the robust frame plus fantastic bed probing mean there’s no calibration required after moving it.

  • r6e@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    5 months ago

    Goodness no.

    It is such a cool little printer, but it is very much an enthusiast product. You’ll find yourself doing way more tweaking and troubleshooting than printing. And support will be… thin. Also, the general body of 3D-printing knowledge is largely geared towards common styles of printer, which this is not.

    I’d suggest going for a Bambu A1 Mini, Prusa Mini, or the like. If price is a concern, the Kingroon KP3s is a solid budget choice, but a bit more manual.

    As a beginner, any printer geared towards enthusiasts will just be endlessly frustrating. My strong recommendation is to just go with something tried-and-true, and well-supported.

    • anon2963@infosec.pubOP
      link
      fedilink
      arrow-up
      2
      ·
      4 months ago

      Not yet, I am looking to buy my printer in a couple months. If I get this one then I will test it and do a write up of it and post it somewhere.