I have a PC currently configured to dual boot Windows 10 and Linux Mint. I don’t need Windows anymore, but Mint is working just fine and I’d rather avoid wiping the whole thing and starting over. Is there a safe way to just get rid of Windows?
I have a PC currently configured to dual boot Windows 10 and Linux Mint. I don’t need Windows anymore, but Mint is working just fine and I’d rather avoid wiping the whole thing and starting over. Is there a safe way to just get rid of Windows?
Is your SSD an NVME drive? It’s possible that there are non-UUID references (maybe /etc/fstab, or GRUB’s config) to the drive that are involved in the boot process.
Maybe it is looking for /dev/sda2, which is correct on the USB disk, but now everything is on /dev/nvme0n1p2.
Solution: Live disk, mount the root and boot partitions, look at the config files and fix the references.
-Or-
It could be that your boot manager has an an entry for the 128GB drive already, just pointed at the wrong .efi file.
If you were originally on Arch for example(, btw) on the 128GB drive. During the installation of the bootloader you would have inserted an entry into the boot manager like:
But now, since you’re on Mint, arch-linux.efi isn’t there and the boot manager falls over.
Solution: Live disk, use efibootmgr (https://wiki.archlinux.org/title/Unified_Extensible_Firmware_Interface#efibootmgr), to delete the bad entry (\arch-linux.efi) and add one pointing to the correct file (\mint.efi ? grubx64.efi?).
e: It looks like Mint uses grub, so you could also live disk -> chroot into the environment -> run grub-install (https://wiki.archlinux.org/title/GRUB#Installation) to create the entry. You will still have a ‘bad’ entry which you can delete with efibootmgr.
My 128GB is meant as an integrated NVME drive.
Meant to be. I literally cut a service panel hole under the laptop to remove or reinstall it whenever I feel like, or maybe eventually upgrade it.
I’ve been booting off of other devices, like my 8GB USB flash, 100GB USB HDD, and even Live Boot USB DVD drive. It’s actually been very convenient, as I can boot off of whatever the hell I want from USB.
My backup is on a 4TB, so really no worries to me, I can more or less freely experiment around with whatever OS I want, and if it doesn’t work right, I can just dd my backup over whatever again, and it just works.
But why doesn’t the dd 100GB>128GB work as I’d expect?
Obviously that’s not the exact dd command I used, for privacy reasons.
🤷
There’s not many things that are happening at boot: the UEFI Boot Manager points to GRUB which boots your system.
It’s almost certainly one of them. The Boot Manager’s entries can be fixed with efibootmgr
Most likely you’ll also have an issue after it boots because of the swap from being on /dev/sda to /dev/nvme0n1. Your home directory or swap file from the USB drive probably in the fstab like:
Now /dev/sda doesn’t exist anymore, because you’re on an NVME drive. Now those directories will be at /dev/nvme0n1p3 and /dev/nvme0n1p4. You’ll have to edit fstab manually to fix this. If fstab is using UUIDs then it’ll work as-is since the partition UUIDs would have been part of the image.
e:
Unless you did
Then you’re probably fine.
Wait wait, I just double checked.
Apparently my 128GB is a SATA M2.
Fuck I’m still learning this new hardware. 🤦♂️
In almost all cases it’ll be the same situation. The boot manager is pointing the wrong way. You added the entry to the 100GB drive when you (or whatever Mint uses to install) ran grub-install. You also have an existing entry for the OS on the 128GB drive.
The only way it would have worked seamlessly is if you plugged the 128GB drive into the same connection that the 100GB drive was on AND both the original OS and Mint both use grub AND install it in the same location.
It’s an easy fix once you know what to look for (just run efibootmgr --unicode and you’ll see the boot entries).
I hear ya there, but…
I be getting really confused when one config boots from /dev/sda, but when I have my backup drive attached (not the boot device), it boots from /dev/sdb
Hell I dunno, I probably confused the hell out of my laptop plus myself with my cutout mod reconfiguration, but it’s happy to boot from almost anything now.
Almost…
Hey, at least I know how to restore to my previous state from backup via dd 👍
You probably just have multiple boot entries and some are higher priority, so if you plug in a drive it’s boot config is higher in the boot order and since it is available it’ll boot that.
Just run
You can see all of the entries and their boot order.