I bought a 2nd-hand 12v 2A power supply without branding. I intend to use it on a DVD player. Coming from the street market makes it dicey because anything in that market could be from someone’s dumpster dive. To ensure it’s useable I used a DMM to measure the volts. It started at 18v but continued to gradually climb. When it passed the 20v scale on the DMM, it quit reading. So it would probably go even higher in the next scale.
I expect the voltage to be higher than rated because the 12v rating is expected to be a measurement under load. But my whole point is to check whether it is safe /before/ driving the appliance. Seems strange how the volt reading kept increasing. Is that expected? Is there another test I should do?
Most consumer appliances and electronics like DVD players have internal power regulation that will tolerate some variance of DC input voltage. (Especially at nominal battery voltage ranges IME, including 12v.)
2nd the rec of dummy load voltage test. If the power supply works as expected, it should immediately drop below 15v. If it doesn’t, replace it. While it might work in initial testing, it would put additional pressure on the internal power conditioning of the player, which would promote early failure of related internal components.