For Resilio Sync mobile it is both on-the-fly and a configuration. You can mark individual files and folders as ones that always needs to be synced at all times and available for offline use. For files that are not synced already, simply tapping them will download it. I’m not sure how it behaves on Desktop since I don’t have the Pro version with selective sync.

Synology Drive is pretty much the same as far as being able to mark things for offline use, but the OS integration is nice because all un-synced files and folders still appear in the filesystem, and opening any files will magically sync them if needed.

I would hope Resilio Sync Pro desktop has the same OS-level integration, but I couldn’t say for sure.

Update: For both systems, selecting which content is always synced is a per-device configuration. For example, If you want different files always available on your phone vs your tablet, you just mark those files however you wish using the app on each device.

Synology Drive has all the features you want and with desktop (macOS, windows, Ubuntu) and mobile clients (iOS and Android). The potential downside is that you have to buy a Synology NAS to run it. I’ve had one for a number of years and I’m still very happy with it.

I also really like Resilio Sync. The downside there is that while the mobile client supports selective sync (you choose which files and folders to always have on-device) only the paid “pro” version of the desktop client supports it.

One body per sketch was always a deal breaker for me, so it’s good to hear that limitation is gone.

Do you know if sketches are still required to represent a single continuous face? For example, 3 concentric circles would not be allowed because it is ambiguous which parts are “surface” and which are “holes”. F360 doesn’t impose this limitation because it allows you to select individual sketch faces to move into 3D space, whereas FreeCAD considers that a single operation on the entire sketch.

Hmmm… that page doesn’t mention the free “personal use” license for hobbyists.

https://www.autodesk.com/products/fusion-360/personal

^ This page still exists, and doesn’t mention it is going away, so maybe there is still hope.

To me this automation seems much better suited to using the Node-RED addon. There is a built in “delay” node that can be used for rate limiting. You would set the delay node to once per hour and put it between the node watching your motion sensor, and the node flipping the light switch. Easy stuff. You could do the same with one or two more nodes to get and check the current wind speed and put that inline as well.

Keep in mind though, any kind of rate limiting/cool down makes it more likely that the lights won’t turn on when you actually want them to. For example, if you leave the house and come back after the lights have turned off, but before the cool down period expires you won’t have lights.

No worries. I was really hoping you were fed up with an Ender 3 just like I am 🤣

I’d very much like to see a follow up to this after you have a few prints under your belt. What you like or don’t like, or compare to other printers you’ve had.

You make a very good point here. Currently the provided backup node is limited to 10GB, which is a lot, but probably not for what you are trying to accomplish. The Anytype folks have also stated that in the future they plan to charge for larger backup nodes, which may be something you want to avoid.

In the meantime, because syncing is p2p, I believe you can effectively self-host by just making sure you have an internet-connected machine always running the client app. In that way, there will always be a peer to sync to, even if your backup node is full and not accepting more data.

Not self-hosting, but I have been using Anytype for a few months now and absolutely love it. I’m doing a lot of online coursework, and so I’m using Anytype to take and organize my notes actively for several hours a day, every day. I also use it for task tracking, journalling, and it has just generally become the place where I dump any kind of info I might need to retrieve in the future.

There is a learning curve before you get the hang of it. I was also frustrated by the editor at first, but now that I have learned some of the slash commands, added in with markdown formatting, I find it to be really efficient. One oddity that likely trips folks up is that every paragraph is a separate “block” which makes partially selecting text across blocks impossible. On the other hand though, it makes grabbing a block and repositioning or reformatting the contents super simple.

Keep in mind that Anytype is offline first, p2p for syncing, and end-to-end encrypted. So the value of self hosting is, I suppose, not using their provided (currently free) backup node? It doesn’t seem like a big deal to me unless you don’t trust the encryption.

Indeed. My Ecobees are actually prevented from accessing the internet at all at the network level, and they still work great through HA. The only issue is that without internet access, the clocks drift ¯_(ツ)_/¯

Ecobees work local-only if you use the HomeKit integration in HA (no Apple devices or cloud connection required).