Brother laser printers last for years without issue. My point was that so long as you put in a little effort to find something that isn’t cheap shit you can actually get a product without any major issues.

Cheap wireless earbuds will fail, and will cause all sorts of frustration. On the other hand, well sourced earbuds will work for years without problems, just like printers.

My wireless g304 has been rock solid for years now. The battery lasts about 48 hours of active use before needing to be recharged. My Logitech ergo lift mouse has been rock solid for the past year as well and it’s still running on it’s very first battery!

I bought both for wrist pain reasons and for the most part they have also been very helpful for that too. Part of the reason I went wireless even for gaming is that the cable always dragged and caused issues with the mouse catching on occassion. It’s very worth whatever “instability” you might see for any product that moves.

My wireless earbuds have been rock solid for several years as well. As far as I’m concerned, wireless has been a solved problem for a little while now, similar to printers. There’s no point in needing a battery for something that doesn’t move, like a keyboard, but damn if it isn’t really nice for something that does.

This is offtopic, but fuck it, might as well.

Why do you use a digital wallet? For me, money is one of those thing I literally can’t allow to fail; growing up poor means it’s still a touchy subject. A digital wallet adds extra risk of payment failure everytime it is used.

So, what does a digital wallet add that makes it worth not just the effort of setting it up in a stock system, but also in a custom ROM where it is actively broken by the app developers as a form of “security”?

For reference, I still keep cash on my person in case my cards (or their machine) fails.

I know I posted this on your comment, but I would love to hear everyone’s answer to this.

Network paths in libraries have been fully removed and will no longer work. This functionality has been deprecated for a long time, and most of it was removed in 10.9.0, but this removes the remainder. See PR #12446. Third-party clients relying on this functionality should be able to re-implement it as required.

from the article.

Shame about the network location regression. That’s the only thing that keeps my kodi device from taking 5-15 seconds to load each sub menu.

No it doesn’t. Future promises are nothing to the now. Just because I didn’t add a “for now” to my first comment doesn’t mean i’m “literally” wrong.

We are starting with iOS and Android games because this is where most dark patterns appear, but we will be adding other platforms soon.

It literally is.

Mobile only. Lovely resource.

It didn’t actually. If it had, I wouldn’t have pulled up my podcast app to find and listen to this episode, only to find that it didn’t exist.

Ah. I get it. Pet peeves do be the worst sometimes.

They really aren’t that far off… https://robindev.substack.com/p/cloudflare-took-down-our-website

I have a pretty solid average of 2-3 terabytes of download a month. My upload is between 4 and 10 terabytes a month.

I stream a lot of movies, youtube, etc. So does my roommate. I once had a sales rep in a different apartment say over the phone that I wouldn’t need to worry about the data caps. I laughed and hung up. I’d rather have slower speeds with no cap than higher speeds with a cap. there’s no point to having all that data if you spend the whole month worrying about hitting the data cap.

Yup. If the sd card doesnt have enough space for everything, you could attach an m.2 hat to it as well. https://www.raspberrypi.com/news/using-m-2-hat-with-raspberry-pi-5/

Basically, jellyfin on the pi, with the wifi setup as an access point, and whatever amount of storage you need. The pi requires 5v/5a, so you’ll probably run into issues running off the car usb power, but a cheap 30amp hour battery should run it for 6-10 hours if my napkin math is right.

After minor setup, my experience has been incredibly plug and play.

They’re apparently shit for anything not cardboard, but they really shine when the only thing you’re cutting is cardboard.

I wanted to test that for myself.

Ceramic?

You understand that, for everyone except for a complete network pro, that is worse for security and privacy, right?

Don’t get me wrong, it’s great that you can.

But the reason piracy websites struggle so much with long term stability isn’t because they’re hosting the wrong software.

This would work with regular shaped blades, right? Like this? https://www.amazon.com/gp/product/B01GIZ9164/

Don’t get an ender unless you want your hobby to be working on the printer. That’s fine, but it’s not the same as having something ready to go when you unbox it.

Prusa printers are quality and open source; very much worth supporting if you have the money. Your hobby will be printing things for other things if you get one.

Bambu printers are cheap, but not open source. However, you will spend most of your time actually making stuff instead of fixing the printer.

Cheap, reliable, open source/modifiable. Pick two.

I’ve been on LMDE for several years now and had no major issues with my 1080. But also I have no idea if I had to anything to get it started.

If you assume the number of people who live across the country from their mother is the same number of people who live with their mother, the balance is completely in favor of the across country people. the difference between 0 and 18 is way less than the difference between 18 and 1200.