Wow yeah that first one is pretty terrible looking 😅

I’m decently pleased with mine though, but I’m really looking forward to the quality on the voron. I actually already have “the filter” on my current printer (slightly oddly placed in the tent, but it works), and I just connected it directly to the printer PSU and manually turn it on/off with a toggle switch.

The solution was more cooling. It was warping due to too much heat, I increased cooling to 100% and reduced overhang speed slightly and it now prints well.

Both ASA and ABS are approved materials. ASA has higher heat defection than ABS, should be easier to print and it smells significantly less when printing.

Fans are completely disabled, except for overhangs and bridges. If I disable fans for overhangs and bridges, they sag like crazy.

I doubt draft shield is going to do anything, the printer is already completely enclosed in a tent. I have around 50-55°C inside the tent.

Edit: I tried a re-print with less cooling for overhangs, it seems to exacerbate the issue significantly.

I just swipe left for “back” (android), and I can access everything just fine, it just closes the TOS. Just do that every time I open the app, works like a charm.

You’re just making it worse better.

But then you don’t want face-melting lasers.

Now hold on…I can see that being useful too. Two consecutive failed face IDs? BAM!!!* face melting laser on the (probably) unauthorized person trying to access your phone.

These watches typically come with charging cables, not a docking style station that you put them in. And keeping devices at a perpetual full charge for expended periods of time is a surefire way to kill the capacity quickly.

I mean, I get a full week from my coros pace 2, with 5-6h of GPS cardio tracking (running) and 24h metrics (steps, stress, sleep, etc.) on a 310mAh battery. It takes a whopping 2h to recharge back to full, I would hate having to manage a tiny extra battery to save those 2h of not wearing my watch.

If all you want from a watch is time and alarms, you’re obviously not even remotely in the demographic that any smartwatch is targeting.

So am I, no hiccups whatsoever.

Because the implication is, that Tesla isn’t doing something bad WRT how they designed the stalls? IDK, anything that’s not bashing Tesla directly seems to get down voted here, even if it’s not actually related specifically to Tesla.

It is objectively safer to park like that (charging or not). Most parking lot accidents happens as someone leaves the parking spot. The risk of accidents when leaving the parking spot is significantly reduced compared to parking front first.

It was actually quite well planned out, opening up the network in stages to see that everything worked as intended before a wide rollout. You can even see in the app which chargers are open to other car brands. This mistake is 100% on the driver, the info is easily available to that person.

On top of that, the bZ4x is apparently a really shitty car. So on top of only having that one model, it’s also a terrible one.

The comment I originally commented on compared them as if they were similar tool, (before it was edited), which I simply pointed out it is not. It’s like saying a plane and a helicopter are the same, sure they both are able to lift off the ground, but the similarities kind of stop there.

But they don’t really have similar scopes… One is for technical models, based on extruded 2D drawings, the other is for abstract 3D modelling. Sure in both if them the end product is a 3D model, but they’re achieved in vastly different ways with completely different skillsets and different use cases.

Blender is not CAD software though, it’s 3D modelling software. They’re not quite the same thing, and they’re intended for (and excel at) different things.

Would this be a good entry level device?

Kind of impossible to say right now, it’s not released yet. On paper it seems like a good deal, almost too good at that price point. I wouldn’t buy one until I’ve seen some reviews.

Damn, that’s a crazy low price for a coreXY with a 42.000cm^3 build volume