Yeah, I don’t see it any different from a person that says

“I want to be called Micheal, not Mike”

Interesting idea,

But search sites currently can’t find anything in lemmy.

So how will they link to this?

Yeah, have you seen the size of those? Those are chem lasers in order to get the wattage needed to destroy something.

Plus you need the electronics/mechanics to track the device perfectly to keep the laser on target in order for it to do damage.

All completely unnecessary to drop a small drone out of the sky.

Nah, lasers too big. It would be a simple birdshot shotgun. Its detection and aiming.

When they are high up, they can be hard to spot and hear.
But a pair of sensitive mic’s and a camera designed to look for them could easily be paired with some AR glasses.

What sucks is that us hobbist’s can’t get FPV, motors, ESC’s, or batteries at reasonable prices (if at all)

The reality of it, is this is short lived.

Anti-Air meant for small drones like this is coming and soon.

And it will shut these down quickly.

Vote with your wallet

I did.

I bought my 3080 back in 2020, because I knew AI was the future of graphics, based on all the R&D and white papers nVidia was pumping out up to that point.

No regrets.

Not my problem nVidia was the only one to invest in the tech, while AMD relied solely on TSMC to shrink their dies.

It has nothing to do with brand loyalty or fanboys or any of that shit.

It’s just straight up better tech.

hahaha… it saddens me that only those >30yrs old may get this.

UPDATE:

Ernest update -> https://kbin.social/m/kbinMeta/t/875274/RE-Is-Ernest-still-here

We’ll stick here and wait it out, and see if it becomes more stable.
Still no talk from Ernest about expanding out a team for something as big as kbin.

But hopefully it works out.

Link to new magazine

https://fedia.io/m/functionalprint

Then I recommend Prusa Slicer.

This is likely a slicer issue.

What slicer?

Randomize Z seam

There is never a situation where this is a good setting to have on.

_ I’m not using … “retract on layer change”_

There’s your problem.

Not my design, nor have I printed it,

But looking at it, those printed bolts should not be under a lot of stress. They appear to just hold the part from sliding off the table.

All the weight of the drawer and it’s contents should be in the C-Clamp shape.

No matter what printer you get,

I recommend avoiding any printer designed to move the bed in the Y-Axis.

It’s an old design prior to CoreXY and it isn’t needed anymore, and has a lot of cons compared with no pros.

Stuff with motors are, like air con and refrigerators. Those are better left on AC.

No. Trend is they are all showing up with frequency drives. Of which those inverters are rectifying to DC before making their own AC.
Efficiency gains are massive of a frequency drive , hence why they are doing it.
Would be even better if they could drop the first rectifying circuit and just use the inverter portion only.

You lose very little by rectifying AC

You lose a lot actually in all the small cheap rectifiers that are in every device in the house.

Where a single purpose designed FET rectifier that is built for efficiency at the breaker would be drastically better.

You wouldn’t have to.

Every device instead of having an expensive PD communication device in it, would have an even cheaper PWM DC Step-down.

No communication needed.

Each device would just draw what it needs to.

_ It wants 3.3V, or 5V, or 12V, or 48V, or 18.7V,

Exactly

That’s why if you had a 110VDC supply at the wall, you do a simple PWM step-down to the required voltage in every device.

LOADS cheaper/efficient than any USB-C PD circuit…

Saves on transformers, saves on dozens of USB PD wall outlets, saves on communication needed to communicate the PD required between each device and every USB PD wall outlet.

Much cheaper. More efficient.

If only the wall was 100VDC instead of AC

No, AC requires large heavy transformers and then rectifying.

DC dropping down to a lower DC is way easier and more efficient.

Well, I mean if you don’t understand power electronics I don’t see how you can make that statement.