So, here’s my attempt

The first portion (^.?$) matches all lines of 0 or 1 characters.

The second portion (^(..+?)\1+$) is more complicated:

1. (..+?) is a capture group that matches the first character in any line, followed by a smallest possible non-zero number of characters such that (2) still matches (note that the minimum length of this match is 2)
2. \1+ matches as many as possible (and more than 0) repeats of the (1) group

I think what this does is match any line consisting of a single character with the length

• divisible by some number (due to the more than 0 condition in (2), so that there have to be repeats in the string), that’s not
  • 1 (due to the note in (1), so that the repeating portion has to be at least 2 characters long), or
  • the length itself (due to the more than 0 condition in the (2), so that there is at least one repetition)

Therefore, combined with the first portion, it matches all lines of the same character whose lengths are composite (non-prime) numbers? (it will also match any line of length 1, and all lines consisting of the same string repeated more than one time)

I haven’t used it in a while, but I think it just sends you an SMS with a code that you can enter manually, so yeah it works on devices without a SIM

I think you should still pass --cmd Hyprland to it, no?

I’ve been using nheko as my Matrix client and main Telegram client via mautrix-telegram for the past 4 years. I fixed a couple of annoying bugs myself, and it has been working great for me since. Shame your experience isn’t the same, maybe you can report the bugs to the devs (who are amazingly responsive).

There are android phones that are even thicker, with amazing battery life and fall protection. Check out DOOGEE for example.

There are a couple of non-electron matrix clients I enjoy: gomuks (TUI, therefore really light-weight), and nheko (Qt-based native app that’s about as snappy as telegram, but with less animations and crap).

Yep, that has actually been a dream of mine for a while, I went as far as downloading the source code and setting up the build environment, but then got a bit overwhelmed by the task. It would be amazing to have this.

Thanks! The documentation team is busy working on it right now :) You can check out https://nix.dev and https://wiki.nixos.org - both are relatively new. There are also lots of improvements in developer documentation for Nix and nixpkgs in the last year.

“NixOS project” did not call anyone nazis, there was no “purge”, this article is clickbait and ragebait. What one contributor, however prolific, says, doesn’t represent the entire project (even though I somewhat agree with him here - there are sadly some bigots in the community).

Nobody forced Eelco (the founder of Nix) to “abdicate”, but there was indeed pressure to step down as the de-facto BDFL put on him by various people. He’s respected as an engineer, architect, maintainer and mentor, but his community management skills were perceived to be lacking, and there were other perceived issues in the community - which boiled down to the fact that a lot of contributors didn’t feel like they could influence the direction of the project. Note that he’s not expelled from the project in any way, he’s still a maintainer of Nix itself, which AFAIU from my interactions with him is what interests him the most, and he’s more or less happy to leave administrative/community stuff to other people.

Then began a process to establish a new governance structure. Currently, we’re up to a stage where there’s now formal community values and a new constitution for the project. There’s an election happening right now, with all active contributors able to become candidates or vote (although the deadline for candidate nominations has passed, so now we can only vote).

Yep, happy that more and more people recognize it for a treasure of features and customization that it is. For me, it’s the best app for trekking, hiking, and offroading there is, even if we consider proprietary stuff like Fatmap and such.

Not OP, but this looks like 3D Relief (requires OpenGL render) + Terrain (Avalanche mode) + Contour Lines + Weather Plug-in. My setup is quite similar, and I also have an optional satellite/aerial imagery layer, a Hiking map style, and quick actions set up to toggle all those on or off when I need to declutter the map. AFAIR all require Premium/Plus to use.

Here’s my profile if you want to quickly set it up in your app: https://share.balsoft.ru/OsmAnd-profile-balsoft.osf

Not disagreeing, but if you’re just looking for a small Docker image, might as well build a static binary and ship it without any distro at all. Or, if you really need shared libraries and other dependencies, you can build a docker image with Nix and not get anything other than the dependencies.

UNIX was kinda designed to be an IDE (of its time) by itself. Desktop/Server Linux (whether GNU or non-GNU) mostly continues this tradition; you are provided with some powerful tools for text manipulation, development, debugging and deployment out of the box in most distros. As such, any modern Linux distro is pretty good for development even out of the box. However, you must learn to use this power, and I’m not claiming it’s easy (I still regularly look up various manpages despite doing development on Linux for 10+ years in various forms).

With that said, I myself prefer NixOS. It really feels more developer-oriented that other distros, as you get the power of Nix out of the box, and integrated into the system. With Nix you get easy access to the biggest software repository in the world. You get per-project development shells, so that you never have to worry about different toolchain versions for different projects, or your system being contaminated with bloat you no longer need. You get the power of reproducible packaging, to eliminate a lot of (but unfortunately not all of) “Works on my machine”-type of problems. It’s also got a hell of a learning curve, but I think it’s worth it.

My understanding is that the Congress of Soviets was replaced with the Supreme Soviet, the democratic structure was changed but the Soviets remained, just shifted in form, and could still be used democratically, just not in all cases.

I believe this is true, but I would argue that the fundamental change was that non-Party candidates were almost never allowed to run. As I noted, this is not due to a constitutional change but rather a change in electoral tradition. Anecdotally, as a result of this, all three my grandparents didn’t feel represented by their deputies/delegates, and welcomed that part of the Perestroyka changes, when the rules were relaxed and more alternative candidates appeared.

A good analogy is that most local governments in the US run uncontested.

I believe this to also be a non-ideal situation (especially given the two-party system where neither represents the working class). However, aren’t there at least party primaries, so that one can choose which candidate from the dominant party “runs” for the uncontested election? Whereas in USSR the candidates were chosen by the Party and not the electorate directly. (my understanding of the US electoral system is lacking, so I may be wrong here).

That’s why I stressed reading Blackshirts and Reds, which dispels the mythology and takes a critical, nuances look at the USSR.

Thanks for the recommendation! I’ve started to read it a while ago, and mostly agreed with the contents. I’ll have to pick it up again.

Soviets were de-facto abolished after 1936 (not due to the constitution itself, rather “by tradition”). While there technically were elections, in almost all cases there was only one candidate. The three of my grandparents that I grew up with (all proudly working-class - teacher, engineer and doctor, born in 1930s), never participated in elections with more than one candidate until Perestroyka (at which point the communist project was on its deathbed).

Note that I’m not even anti-USSR, it’s still markedly better than the bullshit capitalist systems. There actually was plenty of workspace democracy, and some local democracy, but I don’t think we should glorify it as some bastion of democracy. There still unfortunately was a kind of ruling class - the Party and MGB/KGB (but I should note that it was much easier for a working-class person to join their ranks than it is in capitalist “democracies”). Rather, learn from what it got right, and fix what it got wrong.

Problem is not how weak or strong the encryption is

Here it’s definitely part of discussion. The context was

It’s encrypted anonymous communication capabilities.

It’s barely anonymous, and poorly encrypted. The latter is the reason Durov is in custody while Signal devs are scott free. He could easily turn illegal stuff over to French authorities, but doesn’t.

The bigger problem is that people somehow assume this a huge threat, while all previous cases didn’t involve anything like that.

There have absolutely been cases where a backdoor/weakness/lack of encryption used to catch criminals before: https://en.wikipedia.org/wiki/Operation_Trojan_Shield https://en.wikipedia.org/wiki/Ennetcom https://en.wikipedia.org/wiki/EncroChat . I distinctly remember that there were also arrests of opposition activists in Russia based on personal messages in VKontakte, but can’t find the news right now.

real criminals do their stuff everywhere (especially on telegram) for years, staying safe.

Some are staying safe, others are being caught precisely because of this.

Problem is not how weak or strong the encryption is, but that once you are under oppression and do opposition activities, you’re going to learn by yourself how to deal with it.

Using better encryption schemes is definitely part of that.

Toy may call it TLS but it’s a custom protocol.

Sure, it’s mtproto. The security it provides for non-encrypted chats (which are the absolute majority of chats) is not any different from just having TLS for transport. It’s potentially even worse as it’s not as well-audited.

Data is not kept unencrypted on their servers, according to their docs.

That just means that they store both your data in some encrypted way and the key. They can still read it trivially. You don’t even have to know the protocol to understand why: you can add new devices without having any other device online, and read all non-secret chats. It might also just mean disk encryption, in which case it’s plain-text in RAM while the server is running.

FYI a great way to share your logs (if you have internet on the machine but no GUI) is to use a pastebin like 0x0.st. E.g. do journalctl | curl -F'file=@-' https://0x0.st and post the link here.

I’d try the kernel version used in 23.11 to see if that fixes it. Add boot.kernelPackages = pkgs.linuxKernel.packages.linux_6_1; to your config (make sure to add it before the closing }) and sudo nixos-rebuild switch . You can also try older versions, like linux_5_19. If it doesn’t fix the problem it might be that the ACPI error is a red herring and the problem is something else entirely, in which case it’d be more difficult to diagnose, and I’d recommend just staying on 23.11 for now and only taking the new packages that you need from 24.05. There’s a great post on how to do this here: https://discourse.nixos.org/t/installing-multiple-packages-from-unstable-channel-in-configuration-nix/19271/2 (probably also in the docs somewhere but I couldn’t find it easily).

There’s user to server encryption, just not e2e.

That’s exactly what the comment said: The only encryption that applies to most chats on that platform should be transport encryption via TLS. It’s about the same level of encryption as Lemmy PMs.

The fact that Telegram doesn’t cooperate with French authorities doesn’t mean that it doesn’t cooperate with other authorities or sell your data to the highest bidder. They have all the technical means for it.

Don’t use a regular Telegram chat if your life depends on the messages being private. Use XMPP, Matrix with E2EE, or at the very least Signal. Heck, even WhatsApp is (reportedly) better, as it claims to provide E2EE and that’s been checked by some security professionals who have been given access to the source code. If you absolutely must use Telegram for something like that, only use secret chats.