In other words, if you cannot afford a stamp it would restrict you.

The US postal system doesn’t have reply-paid postage?

I was thinking that I would have to switch to bsd.

Finally the year of Hurd on the desktop?

“ChatGPT, write a letter to the community that says I am looking after this issue with untrusted BLOBs and it is of high importance but do not be specific about anything.”

+++

OK

ATH

NO CARRIER

OK

Mainly the issues are about providing ~600 kilowatts for 8 minutes to charge your typical size EV battery.

A row of 5 chargers of that size soaks up 3MW if they’re all in use, and that’s not something that can be quickly or easily shoehorned into a suburban electricity grid.

It’s about 500 houses worth of electricity usage, for comparison. For just 5 fast chargers.

Not to say it’s impossible, but infrastructure doesn’t come cheap, and so it’ll cost quite a bit to cram that 80 percent charge into your car’s battery.

You are flashing the chip directly so apart from inadvertent short circuits and such if it doesn’t work you can just keep trying until it does.

As for wire length it all depends on how fast they clock the SPI bus when flashing. You’ll probably be able to get away with 20cm or so without difficulty , I’ve driven SPI displays with that kind of wire length before.

Well this seems to go against all sorts of disaster recovery practices, so I’m torn between believing they are truly incompetent or they are just lying.

Something like a raspberry pi or equivalent, and use reverse SSH set up to connect to a server with a known address on your end.

This means that ports don’t need to be opened on their end.

Also if you go with a gateway host, shift SSH to a randomised port like 37465, and install fail2ban.

Microsoft is shit. Windows, is shit. Windows 11 is a privacy goddamn nightmare.

But in the end of the day, it just fucking works, those damn bastards ensure that. And even when something doesn’t work, it seems, for some unknown reason, most of the online solutions do fix the issue.

Hahahahahahahahahahaha

(Pause for breath)

Hahahahahahahahahahaha

Only if you count “most of the online solutions” as “run SFC /SCANNOW and if that doesn’t work, just reinstall your OS”.

I want a music playing alarm app that’s permanently locked to Sonny and Cher’s , “I got you babe”.

What I’m asking is how tf did text messages and whatever in the walkie talkies ignite a spark strong enough to ignite the PETN?

Pager with firmware that activates an output on date/time X/Y and triggers an ignition signal. That signal is sent o an actual detonator in the device, which sets off the explosive.

Radio with DTMF receiver that activates an output when, for example, touchtone 4 is received over the air, or alternatively if the radio has GPS, another date/time activation via firmware.

Both of these things are relatively trivial for a nation-state to pull off.

So yes, in both cases it’s possible that faulty devices are still around. However, if all the rest of your group has had exploding pagers and radios, most people in the same group would have dropped their still-working pager or radio into a bucket of water by now. There’s probably a few, and they’re probably being carefully taken apart right now to see how it was done.

Afaik such an idea was nonsense previously.

It’s not nonsense, it just takes planning and resources. And now that people know it is possible, buying and using any sort of equipment for your group without having the nagging concern there might be a bomb in it is impossible. And that’s a pretty powerful limiter.

That’s easy. Just fly somewhere and bring it in your carry-on, airport security will let you know.

There’s a lot to be said for “http://yourISP.com/~username” being available 24/7 at no particular effort to you.

As another poster has mentioned, M-Discs are written using a Blu-ray writer and are good for a few hundred years, in theory.

Blu-Ray USB drive and M-Discs is about the best you can get at present. Keep the drive unplugged when not in use, it’ll probably last 10-20 years in storage.

Seeing as there hasn’t been much advance past Blu-ray, keep an eye out for something useful to replace it in the future, or at least get another drive when you notice them becoming scarce.

90% of users when they are presented with the UAC popup when they do something:

“Yes yes whateverrr” <click>

I’ve got photos in Flickr dating from 1999 onwards. Ten thousand or so of them, and a couple of the early ones are now corrupted.

But they are my “other backup” for Google photos so I don’t mind too much. I also have a USB Blu-ray drive at home that I use to periodically burn M-Discs that I hand out to a few relatives.

That’s about as good as I can conveniently do for backup, and it’s probably better than the single-point-of-failure box of negatives that my parents have in their cupboard.

when they’re powered down.

There’s no periodic cell refresh in flash memory like there is in DRAM. When USB sticks are plugged in, all you are doing is powering up the flash chip and interface ICs.

You’d have to read a block then write it back to actually refresh the stored charges in the cells.

I’ve commented on this previously, but this is essentially either a hit piece, or very poor reporting on Reuters’ part.

Basically nobody looks at raw numbers for injury statistics. It’s normalised to injures per million man hours worked, and when you take some conservative estimates on the size of SpaceX’s workforce and the time periods involved, you find that they land pretty much in the middle of current “heavy industry” injury rates.

But it surrrre does look bad if you look at the raw numbers, just like if you looked at the combined raw numbers of, say, 10 steel mills across the country.

Permalink to my previous, much longer, comment

I don’t think there’s anything commercially available that can do it.

However, as an experiment, you could:

• Get a group of photos from a burst shot
• Encode them as individual frames using a modern video codec using, eg VLC.
• See what kind of file size you get with the resulting video output.
• See what artifacts are introduced when you play with encoder settings.

You could probably/eventually script this kind of operation if you have software that can automatically identify and group images.