I like to code, garden and tinker
It does when ya got nosey IT at a university whacking ports for standard proxy services. And doesn’t hurt to do it either, the port is arbitrary. Also they state:
which will only allow authenticated users through.
So it sounds like they have proper authentication enabled.
To add to this spending some time in custody is inconvenient, but losing your rights being convicted of something you didn’t even do is more inconvenient. You think you know what to say until you say the wrong thing and start digging a hole.
This is good to know, but adds an additional step to simply requiring a passcode to unlock on screen lock.
Just the act of refusing makes the act of seizing your phone legal or not. If you legally give them your phone by your own will, they are able to use all evidence they find in the courts. If you deny to give them your phone, and they seize it anyways and access it you have a valid path to throw the evidence they discover out as an illegal search and seizure of your property. I’m not a lawyer but that is the general thought process on denying them access to your property.
Edit: Just want to say this mostly pretains to United States law and similar legal structures. This advice is not applicable everywhere and you should research your countries rights and legal protections.
I personally rather trust that my device isn’t able to be unlocked without my permission, rather than hope I am able to do some action to disable it in certain situations. The availability of such features is nice, but I would assume I would be incapable of performing such actions in the moment.
My other thought is, how guilty is one perceived if they immediately attempt to lock their phones in such a matter, by a jury of their peers? I rather go the deniability route of I didn’t want to share my passcode vs I locked my phone down cause the cops were grabbing me.
To add to this, don’t use bio-metrics to lock your devices. Cops will “accidentally” use these to unlock devices when they are forcibly seized.
The quotation marks did most of the lifting there, and it’s more of an anecdote of their own projections against themselves. They assume these “welfare queens” are driving around in high end cars and living luxurious lifestyles on the governments dollar, while they are the ones doing such. Sorry if there was any confusion. I agree with all the statements you have stated against Brett Farve though, they are the scum of the system they wish to project onto others.
Despite texts that show Favre sought to keep his receipt of the funds confidential, Favre has said he didn’t know the money came from federal funds intended for poor people. He’s paid the money back, but he’s being sued by the state of Mississippi for hundreds of thousands of dollars in interest that accrued on the money he received. Favre hasn’t been accused of any criminal wrongdoing.
Source: (Yahoo News)
So they could easily of have funded this themselves, but just rather steal public funds because “free money”? Sounds like a so called “welfare queen” to me.
Semi-cold? That’s extra, you’ll be lucky to afford it. The affordable water been sitting out on the pavement for a few weeks.
Yea this is just syntax, every language does it a little different, most popular languages seem to derive off of C in some capacity. Some do it more different than others, and some are unholy conglomerations of unrelated languages that somehow works. Instead of saying why is this different, just ask how does this work. It’s made my life a lot simpler.
var test int is just int test in another language.
func (u User) hi () { ... } is just class User { void hi() { ... } } in another language (you can guess which language I’m referencing I bet).
map := map[string]int {} is just Map<String, Integer> map = new HashMap<>() in another (yes it’s java).
Also RTFM, this is all explained, just different!
Edit: I also know this is a very reductive view of things and there are larger differences, I was mostly approaching this from a newer developers understanding of things and just “getting it to work”.
Sadly it wasn’t a bid to open source the AI, rather than a bid for payment.
My question would be, why do you need a more powerful server? Are you monitoring your load and seeing it’s overloaded often? Are you just looking to be able to hook more drives to it? Do you need to re-encode video on the fly for other devices? Giving some more details would help someone to give a more insightful answer. I personally am using a Raspberry Pi 4, Chromebox w/ an i7, an old HP rack server, and an old desktop PC for my self hosting needs, as this is cheaper than buying all new hardware (though the electricity bill isn’t the greatest haha, but oh well). If you are just looking for more storage, using the USB 3.0 slots on the Raspberry Pi 4b you can add a couple extra SSDs using a NVMe to USB 3.0 enclosure. For most purposes the speeds will be fine for most applications.
As for SSD vs HDD, SSD hands down. The only reason you’d pick an HDD is if your trying to get more storage cheaper and don’t mind a higher rate of failure. If your data is at all valuable, and it almost always is, redundancy should be added as well.
And as for running Linux, if it can’t run Linux I wouldn’t want to own it.
Edit: Fixed typo
This might help, sorry if it doesn’t, but here is a link to CloudFlares 5xx error code page on error 521. If you’ve done everything in the resolution list your ISP might be actively blocking you from hosting websites, as it is generally against the ISPs ToS to do such on residential service lines. This is why I personally rent a VPS and have a wireguard VPN setup to host from the VPN, which is basically just a roll your own version of Tailscale using any VPS provider. This way you don’t need to expose anything via your ISPs router/WAN and they can’t see what you are sending or which ports you are sending on (other than the encrypted VPN traffic to your VPS of course).
I use my own router with DD-WRT in-between the ISPs router/modem and my LAN, and use a different subnet. I haven’t had any issues with this myself, and my router just sees the ISP router/modem as the WAN.
SQL is the industry standard for a reason, it’s well known and it does the job quite well. The important part of any technology is to use it when it’s advantageous, not to use it for everything. SQL works great for looking up relational data, but isn’t a replacement for a filesystem. I’ll try to address each concern separately, and this is only my opinion and not some consensus:
Most programmers aren’t DB experts: Most programmers aren’t “experts”, period, so we need to work with this. IT is a wide and varied field that requires a vast depth of knowledge in specific domains to be an “expert” in just that domain. This is why teams break up responsibilities, the fact the community came in and fixed the issues doesn’t change the fact the program did work before. This is all normal in development, you get things working in an acceptable manner and when the requirements change (in the lemmy example, this would be scaling requirements) you fix those problems.
translation step from binary (program): If you are using SQL to store binary data, this might cause performance issues. SQL isn’t an all in one data store, it’s a database for running queries against relational data. I would say this is an architecture problem, as there are better methods for storing and distributing binary blobs of data. If you are talking about parsing strings, string parsing is probably one of the least demanding parts of a SQL query. Prepared statements can also be used to separate the query logic from the data and alleviate the SQL injection attack vector.
Yes, there are ORMs: And you’ll see a ton of developers despise ORMs. They is an additional layer of abstraction that can either help or hinder depending on the application. Sure, they make things real easy but they can also cause many of the problems you are mentioning, like performance bottlenecks. Query builders can also be used to create SQL queries in a manner similar to an ORM if writing plain string-based queries isn’t ideal.
“From March 1, 2024, an order will come into force to block VPN services providing access to sites banned in Russia,” Sheikin was quoted as saying by state news agency RIA.
I assume this means it’s regarding outgoing communications, for censorship purposes most likely. I’d be surprised if they were blocking incoming VPN traffic, and I don’t think the Russian government has an issue with Yandex operating.
For your own sanity, please use a formatter for your IDE. This will also help when others (and you) read the code, as indentation is a convenience for understanding program flow. From what I see:
enable and disable functions are never called for this portion of codeenabled variable, if so it never passes scopes between the handleClick and animation methodsawait for invoke or updateCurrentBox, causing all the code after either to immediately run. As a result, enabled is never false, since it just instantly flips back to true. I’m not sure what library invoke is from, but there should be a callback or the function returns a Promise which can be awaited.TL;DR: The bot is configured to condense certain instances and communities. At the moment, only beehaw.org is marked to be condensed.
Quickly looking at the source code, it seems ReplyToPostsCommand uses a SummaryTextWrapper, which contains an iterable for both CondensedSummaryTextWrapperProvider and DefaultSummaryTextWrapperProvider. The DefaultSummaryTextWrapperProvider has a priority of -1_000 (so it’s always checked last) and is set to always return true on the supports(Community $community): bool. CondensedSummaryTextWrapperProvider references the config/services.yaml for it’s supports(Community $community): bool call which lists 0 condensed communities and 1 condensed instance, being beehaw.org.
If you are expecting a more windows-like experience, I would suggest using Ubuntu or Kubuntu (or any other distro using Gnome/KDE), as these are much closer to a modern Windows GUI. With Ubuntu, I can use the default file manager (nautilus) and do Ctrl+F and filter files via *.ext, then select these files then cut and paste to a new folder (drag and drop does not seem to work from the search results). In Kubuntu, the search doesn’t recognize * as a wildcard in KDE’s file manager (dolphin) but does support drag/drop between windows.
Should work fine as a proxy for HTTP traffic. If you want to forward all your traffic through your home IP I’d suggest using a VPN, using openvpn or wireguard.