

I’ve never been stung, and was always under the impression that they only sting if bothered, but the other day our family was at the beach and my niece got stung just sitting around doing nothing.
I’ve never been stung, and was always under the impression that they only sting if bothered, but the other day our family was at the beach and my niece got stung just sitting around doing nothing.
They’re like right there in the side bar
Pretty sure every tech person at some point or another has had to do exactly that. And not just their mom, but their dad, and their extended family, and their parent’s friends who have a random problem, etc
G̵̖̺̩͔̫̬͇̲̙̙̘̹̀̋̚ư̸̧̨͔͍͔͇̜̹̻̼̤̳̤̥̠͚͈͓̹͙̻̎͗͋̽̈́́̊̄̀̓̌̍͊͒̓͆̔͌̉̂͘͜͠ͅe̸̝͕̦̖̭͚̣̰̖̗̬̳̜̳̬̍̌̊̕͜ͅs̵̛̪̻̯̀͆͂̀̏̓̀̅͐͊̽̓̎̒̓̀͊́͑͌́̏̈́s̸̨̧̥̺̗̗̣͍͓͈̮̙͔̻͍͕̫̩̐̈́̋̾̚͜ ̸̧̮̰̮̫͙͉̦͇͙̜̙͓̳̤͖͍̜͈͈͓͖̦̬̭͓̰́̐̅́̃̆ͅͅỵ̴̧̧̧̼̜͖͎͉͎͊͌̎̐̀̓̈͑̍̃͒̿͂̏̋̀͋͊̿̇̈́͊ǫ̴̰̺̈͒́͒̑̔̔̈̈̏̽͒̾̚͝ų̸̜̪̼̮̥͉̅̿͋̿͗̋͑͗̈̀̊̓̒̈́͌̋̆͘̕̕͘͝͝’̴̧̧̨̡̨̫̱̣͇̠̞̘̭̝͔̪̝̩̮̯͕̭̠̪̩̜͗̈́̀̋̽͘͠ͅͅv̷̧̧̨̱̲̹͎͈̲̙̼̬͈͖͍͓̻̞̥̖̮͙̘̣̙̪̭̽̉̃̑͗͂͊̋͆̏̈͗̑͊̕͠ͅȩ̵̛̮̙̹̳͕̝̲̼̣̠̭̬̥͉̲̭̲̦͈̗̜̳̙̎̎̐̿̇͑̀͆̈́́̽̆̾̍̕̕͝͠ͅͅ ̸̧̢̛͕̠̲̗̜̻̹̥̻̜̲͕̦̲̂̽͐͗͑͐̎́͘ͅn̶̛̤̤͚͙̑̆̾̋̓̊̆̀͐̾̑͝ͅe̵͔̜̘̫̘͍̫̯̘̞̺̪̝̐̆͘v̷͕͙̩̬̩͎̮͚̬͔̯͙̩̦͎̙̫̮̪̝́͐̅̓̈́͂̌͐̊͑̾̆̍͑̈̄͒͆̊̓͗͊̅͊͘͜͠͝è̴̡͈̥̙̙͎̹̳͙̙̻͜r̸̖̻̦͎̣͓̤̙̬͎̱̟̩̺̰̥͓͍̖͎͋̾̄̓͋͂̚ ̵̡̨͍̪͚̯̜̖̫̲̓̅͊̈́̃̏̈́͐̿͆͘h̵̨̡͉̼̣͕͈̙̝̬̼̬̯̖̣̪̟̩̦̺̥̪́̒͂̃̈́̀͑͠ͅe̵̢̳͖͖͉̲̹̣̭̺̪̲̩̥̰̬̟͉̪̊̾̉̀͗̏̀̀͆͂̈̉̆̀͆̍̕͘̕ͅḁ̶̧͉͈̝͇̣̦̜̺̹̦͚̰̲̺̱͔̱͖̻̮̘̣̔͂ͅr̴̡̢̦̱̻͈̻͈͎̻͖͙̥͉̹̙͎͓̯͉̖̗͓͉̅͜͝d̵͖̺̜̫̰͍̰̜̫̤̗̻̘͔͓̜̱͚̗̗̩͒̏̀̇̿̀͘͝ͅͅ ̶͙͈̩̱͈̼̥̳̥̳͉̩̜̠̦̗͈̾̓̒̆̀̾̓̄̂̈̓̓̕͘͜ō̵̡̧̻̤̮͇͔͍̹͚̻̱̗̤̬̻̫͚̲̥̦̽̽̍̏̄̈́̈͊̓̈́̉͆͐͌͒̌̊̄̐̍̽͐͛̉͆̚͘͜ͅf̷̡̼̫̰̖̻͓̜̤͎͖͕̙͈̠̫̮̝͇̗̩̼̬͂̎͌͛̀̓̔͋̐̊̕͜͜͝ͅ ̴̧̡̧̢̛͔̬͔͍͓͖̳̮̘̮̺͔̗̩̫̘̗̥̫̅̈́͆͛͐͆̈͒͊͋̽̑̈́͜͜ͅz̸̘̜̈́̓͐̐̉̎́̔̀̋̈̒͛̏̃̓̕̕a̴̧̧̛̙̩̮̙̝͇̖͎̦̳̩̮͍̣̤̩̙͔̼̮̼͍̱̬̻̾̂͋̓͗͋̓̂̿͛̉͌̈́̈́̾̚͜ͅͅļ̸̡̛͍͙̗̳̦̝̯͙̅̋̀̉́̃̒͋͛̒̍̓̀̾̕̚͜͝g̴̢̢̧̧̛̫̹̳͓͕̪̺͚̩͓̱̦͍̘̮̖̜̜̳̪̞͎̼̮̖̾̔̆̾̉̅ǫ̸̧̨̡͙̹̙̲̻̤̱̺̜̠̞̫͕̮̮͙͙̙̫̙͒̆͒̔͐̈̇̿͋̽̋̔̒͆͆͊̌̌̀̒̂̉͘̚̕ͅ
Hosting matrix really isn’t too bad, you basically just jam everything in a docker-compose and you’re pretty much good to go
The 180 probably would have been pre-tax
Apparently the shipping containers themselves were contaminated. The shrimp itself wasn’t detected to be radioactive but they’re recalling it anyways out of caution.
And this is why tree shaking exists.
Oh you’re right, lol.
That’s probably part of the joke
There is an X in the corner at least
Just use reader mode when you see those
I think the caption is fake but the picture isn’t. If you google “stretch Prius” there seem to be a bunch of photos of this thing going back like 15 years.
95% of the time reader mode bypasses the paywall and this is one of those times
The cpu doesn’t have a wife and kids to feed
It hasn’t become that color, it always was that color, we just didn’t take good pictures of it
Find an stl of a disk and then overlap it with your part
You can try turning up the bed temp, lowering the z-offset to get the nozzle closer on the first layer, or increasing the first layer flow in your slicer. For me the purple glue sticks on a glass bed worked, but sounds like that’s not working for you for whatever reason.
Another trick I’ve seen people use is adding some circles to hard corners like that in the model that you can cut off later.
this is how a buddy and I cheesed playing through seaman in a single afternoon, just kept bumping the clock forward