the16bitgamer@programming.dev to 3DPrinting@lemmy.worldEnglish · 8 days agoPerfectly dry filament, as all filament should beprogramming.devimagemessage-square14fedilinkarrow-up1191arrow-down12file-text
arrow-up1189arrow-down1imagePerfectly dry filament, as all filament should beprogramming.devthe16bitgamer@programming.dev to 3DPrinting@lemmy.worldEnglish · 8 days agomessage-square14fedilinkfile-text
This took forever to get right, but all my filament dryboxes are at 10% and I can’t get it any lower.
minus-squareeyes@lemmy.worldlinkfedilinkEnglisharrow-up4·edit-27 days agoIt does, the more water in the filament the more uneven the extrusion.
minus-squarejokeyrhyme@lemmy.mllinkfedilinkEnglisharrow-up3·7 days agofor some filament, at least PLA and PETG, you don’t want to filament entering the extruder to be too warm because it can soften and cause jams / under-extrusion
It does, the more water in the filament the more uneven the extrusion.
deleted by creator
for some filament, at least PLA and PETG, you don’t want to filament entering the extruder to be too warm because it can soften and cause jams / under-extrusion