Tesla Cybertruck’s stiff structure, sharp design raise safety concerns - experts::The angular design of Tesla’s Cybertruck has safety experts concerned that the electric pickup truck’s stiff stainless-steel exoskeleton could hurt pedestrians and cyclists.

  • Earthwormjim91@lemmy.world
    link
    fedilink
    English
    arrow-up
    168
    arrow-down
    4
    ·
    11 months ago

    Gonna be real fun to see the crash test rating.

    Without crumple zones, all of the kinetic energy goes into the occupants.

    • JohnEdwa@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      79
      arrow-down
      3
      ·
      11 months ago

      OTOH it weighs almost 7000lbs (~3100kg) so it’s going to plow through most of everything with its sheer mass.

      • Thorry84@feddit.nl
        link
        fedilink
        English
        arrow-up
        104
        arrow-down
        1
        ·
        11 months ago

        You’d be surprised how much a concrete pillar holding up an overpass can actually take. They don’t break like in the movies, they are specifically designed to take big truck impacts and not fail. Anybody crashing a Cybertruck at highway speeds into one of those is instantly turned into red colored mashed potatoes.

      • ikidd@lemmy.world
        link
        fedilink
        English
        arrow-up
        19
        ·
        11 months ago

        Go hit a 10"+ tree in a pickup and see how fast you stop. You can wander over and pick the engine up when it flies out the hood. The tree will loose some bark.

      • Cornpop@lemmy.world
        link
        fedilink
        English
        arrow-up
        55
        arrow-down
        1
        ·
        edit-2
        11 months ago

        Believe it or not in the USA it’s actually based off of self compliance in the USA. There is no specific government body that has a standardized test that they have to pass to be made legal. The manufacture gets to make that decision themselves, then if there is an issue that the government finds later they can be pulled from the road.

    • casmael@lemm.ee
      link
      fedilink
      English
      arrow-up
      7
      ·
      11 months ago

      Yeah have you seen the footage it’s as stiff as the rod up musks butt hole

        • yeptemp69420@lemmy.world
          link
          fedilink
          English
          arrow-up
          10
          ·
          edit-2
          11 months ago

          I’m pretty sure that’s BeamNG, yeah. That sand looks like a texture from Johnson valley, I’m pretty sure the wall they’re hitting is either a gas station or a garage model that was placed on a road, and the skid marks from the tires look the same as they do in BeamNG. You can see body panels and doors clipping through the body of the truck on several occasions, too.

      • Felix_Bardner@pawb.social
        link
        fedilink
        English
        arrow-up
        28
        ·
        11 months ago

        Looked convincing at first, but it felt too clean- Then at 7 seconds in, you can watch a white panel clip straight through the door and windshield lol

      • Earthwormjim91@lemmy.world
        link
        fedilink
        English
        arrow-up
        42
        arrow-down
        8
        ·
        11 months ago

        Because unless they have been outright lying in all of their specs, the entire body is made up of the same thick stainless steel that they have shown to be literally bulletproof.

        It’s 4x as thick as current sheet metal used in other vehicles, and twice as thick as the steel bumpers used in old cars that didn’t have crumple zones.

        That combined with the fact that they have stated that all of the strength and rigidity for the truck comes from the exoskeleton, that would preclude being able to crumple.

        They have not made safety a priority in anything on this monstrosity. The windows are are all laminated and shatterproof, meaning you can’t break them to escape if there’s a fire or you end up underwater and the body is bulletproof meaning that it can’t be torn open with the jaws of life if you need to be extracted.

        It’s a giant metal coffin.

        • weew@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          11 months ago

          I don’t know what the hell you’ve been reading, but they’ve never claimed the entire truck is solid stainless steel. Just the exterior panels.

          they claimed that the exterior panels would be able to add to the rigidity and strength of the truck. Not that it was 100% rigid or that the exterior made up 100% of the structural strength.

          The interior is still basically just a regular aluminum body like all their other cars.

        • Cornpop@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          arrow-down
          3
          ·
          11 months ago

          Windows will shatter just like any other car window, and a jaws of life would pull apart that tin can no problem.

            • Cornpop@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              11 months ago

              They are just regular tempered glass. That might have been the BS they claimed at the original announcement, but that did not make it to the production version.

        • helenslunch@feddit.nl
          link
          fedilink
          English
          arrow-up
          20
          arrow-down
          19
          ·
          edit-2
          11 months ago

          Because unless they have been outright lying in all of their specs, the entire body is made up of the same thick stainless steel that they have shown to be literally bulletproof.

          Bulletproof steel can still crumple. And it does. It’s not made of adamantium. It’s a completely different type of force. The vehicle was crash-tested a long time ago. Just look at the photos.

          E: wow, this guy is sharing straight up disinformation he pulled from his ass and I’m the one being downvoted…

        • DoomBot5@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          arrow-down
          15
          ·
          11 months ago

          Ah, so it’s all from your incorrect assumptions about how materials work.